The words behind the subject.
Plain-English definitions to make the guides easier to use. A glossary explains a term; it does not replace the context and limits of the full guide.
- All-terrain
- A broad tyre category intended to combine road and unsealed-surface use; it does not mean the same thing as all-season.
- Aspect ratio
- The nominal sidewall height expressed as a percentage of the nominal tyre section width.
- Balancing
- Correction of mass imbalance in a rotating tyre-and-wheel assembly; it differs from alignment.
- Camber
- An alignment term describing wheel tilt when viewed from the front or rear.
- Cold inflation pressure
- The vehicle-specified pressure assessed under the relevant cold checking conditions, rather than immediately after heating through driving.
- Date code
- A manufacturing-date marking; on a four-digit DOT date code the first pair identifies the production week and the second pair the year.
- Direct tyre cost per kilometre
- A stated set of attributable tyre costs divided by a defined service distance; useful only when the accounting basis is clear.
- Duty
- The actual work, loading, speed, surfaces and operating conditions for which a vehicle or tyre is being assessed.
- End-of-life tyre
- A tyre removed from intended service and directed to an appropriate verified handling route rather than returned to use without authorisation.
- Held stock
- A clearly identified tyre or assembly not released for use while an assessment or decision is pending.
- Impact history
- A factual record of a pothole, kerb or other event that may be relevant to professional inspection.
- Like-for-like quotation
- A comparison using the same product specification and the same clearly defined service scope.
- Load index
- A code corresponding to load capacity under specified conditions; it is not a direct kilogram value.
- Return to service
- The documented decision that a reported concern has been assessed and the vehicle or tyre may resume its approved use.
- Road-hazard cover
- A specific commercial cover arrangement, where offered, whose terms must be checked separately from a general product warranty.
- Rolling circumference
- The effective distance travelled by a tyre per revolution, relevant to matching and vehicle-system requirements.
- Run-flat tyre
- A tyre designed for limited mobility after pressure loss within the exact system and product instructions.
- Speed symbol
- A tyre service-description symbol associated with capability under defined conditions, not permission to exceed road limits or safe conditions.
- Temporary spare
- An emergency spare with vehicle-specific restrictions that should not be assumed suitable for normal continued use.
- Toe
- An alignment term describing the relative direction in which wheels point when viewed from above.
- TPMS
- A tyre-pressure monitoring system that warns of a pressure-related issue; its operation and reset process are vehicle-specific.
- Tread wear indicator
- A built-in feature used to help identify tread wear; inspection also considers uneven wear, damage and applicable guidance.
- Unknown-history tyre
- A used tyre for which relevant maintenance, storage, repair or impact information is not reliably established.