A working vehicle needs a defined duty
Start by describing the equipment and the work: vehicle identity, axle or wheel arrangement, tyre and wheel details, typical journeys, surfaces, loads and operating speed. A tyre selected for one duty may be unsuitable for another even when it can be fitted physically. A bus carrying passengers, a delivery truck and a tractor moving between field and road introduce different operating questions.
Give the professional the actual scenario rather than asking for the strongest tyre in a particular size. The vehicle, axle, wheel and tyre each have limits and requirements. Changing one component does not automatically increase the capacity of the complete vehicle. This article does not provide a universal load allowance, inflation setting or permission to exceed a vehicle rating.
Obtain load information rather than guessing
Loads may not be distributed evenly across axles or tyre positions. Competent assessment can require actual weighing and consideration of operating configurations. Michelin’s commercial guidance connects tyre selection and use to the vehicle, intended duty and relevant manufacturer information. The correct technical data needs to match the specific product and configuration.
Discuss loaded and unloaded conditions, trailers, attachments, additional equipment and any material change in use. A declaration of “the truck carries about this much” may not describe axle loading accurately. Record the measurements and assumptions used for the recommendation, including the date and vehicle configuration. Reassess when the load pattern or equipment changes rather than treating the original decision as permanent.
Agricultural work can change between tasks
A tractor may carry different mounted equipment, transport implements, work on different surfaces and travel at different speeds. Tyre decisions should reflect load, speed and application together. Michelin’s agricultural guidance emphasises those factors and the use of product-specific tools or data. A field-use suggestion should not be copied into road travel without the appropriate manufacturer assessment.
Do not improvise inflation reductions because softer tyres appear to improve traction, or copy a neighbour’s setting for different equipment. Ask the adviser what information must be measured and what changes require adjustment. If a tyre or wheel system uses special construction, liquid ballast or other equipment-specific arrangements, identify it explicitly and use competent service rather than applying passenger-car habits.
Keep fitting and damaged assemblies with trained people
Large tyres and wheel assemblies can store substantial energy and create severe hazards during servicing. Commercial and agricultural mounting, demounting and related work require trained personnel, suitable equipment and the applicable manufacturer procedures. This page intentionally excludes bead-seating, split-rim, inflation-cage or other workshop operating instructions.
A reported concern such as damage, unexplained loss, abnormal wear or a changed vehicle behaviour needs an appropriate professional response. Do not repeatedly add air to an assembly with an uncertain history or attempt a field workaround merely because a vehicle is needed for production. Establish an approved service and recovery arrangement before the peak work period, not after equipment is stranded.
Build a practical Zimbabwe procurement brief
A written brief can contain vehicle and tyre identity, actual duty, load-assessment information, surface mix, required support, delivery location and who approves technical recommendations. Ask for relevant product data, fitting arrangements, maintenance advice and a clear scope for any warranty. Compare equivalent technical solutions rather than size and purchase price alone.
For Zimbabwean agricultural and transport businesses, consider the service support actually available along the intended routes or near the farm, while avoiding assumptions about a provider’s coverage. Keep technical records accessible to operators and maintenance staff. A recommendation should remain traceable to its source, and a material change in work should trigger review. Tyres.co.zw is an educational publication, not a load-certification or fleet-engineering service.
- Define the complete vehicle duty and configuration.
- Use actual load information and product-specific professional assessment.
- Reassess when attachments, routes, loads or use change.
- Keep large assembly servicing with competent trained personnel.
- Compare support, technical suitability and lifetime records as well as purchase cost.
Sources & further reading
Use these references to check the underlying guidance and any current local requirements. Practical worksheets and illustrative examples in this guide are original educational material.
- Michelin — commercial truck tyre selection and position guidance
- Michelin — commercial truck pressure and load assessment
- Michelin Agriculture — matching tractor tyres to load, speed and use
- Michelin Agriculture — tractor tyre selection and trained fitting
This guide is general information. Source notes are not a claim of independent professional review.